IPX Ethernet Setup
The first step is to set up your Prestige on the LAN. From menu 3, select option 3 to go to Menu 3.3 - Novell IPX Ethernet Setup as seen below:
Figure 7-2 Menu 3.3 - Novell IPX Ethernet Setup
1.Seed Router - Determine if your Prestige is to act as a seed router. This value depends on the existing network. If there is a NetWare server providing the network number, select No. If there is no NetWare server providing the network number, select Yes.
2.Frame Type - For every frame type that your Prestige needs to support, you need to set the corresponding field to Yes. The frame type(s) selected here must be the same frame type(s) as the server or client stations on that network. Otherwise, the devices will not be able to communicate. You can select one or more of these four frame types:
∙802.2
∙802.3
∙Ethernet II
