(TCP protocol). In this field you determine what type of TCP packets to filter. There are two options:
∙Yes - filter matches only established TCP connections.
∙No - filter matches both initial and established TCP connections.
13.More - In this field, you can determine if you want to pass the packet through the next filter rule before any action is taken. There are two options for this field:
∙Yes.
∙No.
If More is Yes, then Action Matched and Action Not Matched will be N/A.
14.Log - In this field, you can determine if you wish to log the results of packets attempting to pass the filter rule. These results will be displayed on the System Log (see Chapter 13). There are 4 options for this field:
∙None - No packets will be logged.
∙Action Matched - Only packets that match the rule parameters will be logged.
∙Action Not Matched - Only packets that do not match the rule parameters will be logged.
∙Both - All packets will be logged.
15.Action Matched - If the conditions for the filter rule are met, you can specify what to do with the packet. There are three options for this field:
∙Check Next Rule.
∙Forward.
∙Drop.
