Figure 7-6 Menu 12.2 - Edit IPX Static Route
1.Server Name - In this field, enter in the name that has been configured for the server. This name must be the exact name configured in the NetWare server.
2.Network # - This field contains the internal network number of the remote server which you wish to access. Do not use 00000000 or FFFFFFFF for this field.
3.Node # - This field contains the address of the node on which the server resides. If you are using a Novell IPX implementation, this value is 000000000001.
4.Socket # - This field contains the socket number on which the server will receive service requests. The default for this field is hex 0451.
5.Type # - This field identifies the type of service the server provides. The default for this field is hex 0004.
6.Gateway Node - In this field, enter the number
