Collecting General Setup Information
Your Prestige requires the following system information. You can obtain all the pertinent information from your network administrator. Record this information into the worksheet as it becomes available. This worksheet will later be referred to as you configure your Prestige.
∙System Name - This is the name given to your Prestige for identification purposes. This name should be no more than 8 alphanumeric characters. Spaces are not allowed, but
∙Route IP Field - For Internet access, you will need to enable the Route IP Field. See Chapter 4 for more details on configuring your Prestige for Internet access. To support Novell IPX, or Bridging, enable the appropriate protocol and reference the related chapters for detailed information.
You have now collected all of the general setup information you need. Make sure that you have entered all the values onto the worksheet before proceeding to the next section.
Collecting IDSL Information
∙Service Type - There are two options: Client or Server. One IDSL router should be set as the client, and the other as server.
∙Transfer Type - There are two options: Leased 128 or Leased 64. The data will be transmitted in 128Kbps if Leased128 is selected; otherwise, it will be transmitted in 64Kbps. The transfer type must be set the same for both the client and server router.
