ZyXEL Communications 128L user manual Novell IPX Filter Rule, Menu 21.1.3 IPX Filter Rule

Novell IPX Filter Rule

This section will show you how to configure the protocol-dependent parameters for an IPX filter. The fields in the menu are displayed in bold type.

Figure 9-6 Menu 21.1.3 - IPX Filter Rule

1.IPX Packet Type - Enter the IPX packet type value of the packet you wish to filter. This value should be two hex-bytes.

2.Destination/Source Network # - Enter the four hex-byte destination/source network numbers of the packet that you wish to filter.

3.Destination/Source Node # - Enter in the six hex-byte value for the destination/source node number of the packet you wish to filter.

4.Destination/Source Socket # - Enter the destination/source socket number of the packets that you wish to filter. This should be a 4-byte hex value.

5.Destination/Source Socket # Comp - You can select what comparison quantifier you wish to use to compare to the value given in Destination Socket # and Source Socket #.

Filter Configuration 77