management. If your Prestige is configured for IPX routing but not IP in menu 1, telnet will still be available provided you assign your Prestige an IP address.

Telnet Capabilities

Single Administrator

To prevent confusion and discrepancy on the configuration, your Prestige will only allow one terminal connection at any time. Your Prestige also gives priority to the RS-232 connection over telnet. If you have already connected to your Prestige via telnet, you will be logged out if another user is connecting to your Prestige via the RS-232 cable. Only after the other administrator has been disconnected will you be able to telnet to your Prestige again.

System Timeout

When you are connected to your Prestige via telnet, there is a system timeout of 5 minutes (300 seconds). If you are not configuring the device and leave it inactive for this timeout period, then your Prestige will be disconnected automatically.

86 Telnet Configuration and Capabilities

Page 98
Image 98
ZyXEL Communications 128L user manual Telnet Capabilities, Single Administrator, System Timeout