Prestige 1600 Universal Access Concentrator
Menu 22 - SNMP Configuration
SNMP:
Get Community= public
Set Community= public
Trusted Hgst= 0.0.0.0
Trap:
Community= public
Destination= 0.0.0.0
Press ENTER to Confirm or ESC to Cancel:
FigureThe following table describes the SNMP configuration parameters.
TableField | Description | Option |
|
|
|
Get Community | Enter the Get Community, which is the password for the | Public |
| incoming Get- and GetNext- requests from the management |
|
| station. |
|
Set Community | Enter the set community, which is the password for | Public |
| incoming Set requests from the management station. |
|
Trusted Host | If you enter a trusted host, your Prestige 1600 will only | Blank |
| respond to SNMP messages from this address. If you leave |
|
| the field blank (default), your Prestige 1600 will respond to |
|
| all SNMP messages it receives, regardless of source. |
|
Trap: Community | Enter the trap community, which is the password sent with | Public |
| each trap to the SNMP manager. |
|
Trap: Destination | Enter the IP address of the station to send your SNMP traps | Blank |
| to. |
|
Once you have completed filling in Menu 22 - SNMP Configuration, press [ENTER] at the message “Press ENTER to Confirm...” to save your configuration, or press [ESC] to cancel.
11.4SNMP Traps
P1600 will send traps to the SNMP manager when any one of the following events occurs:
1.coldStart (defined in
When the machine coldstarts, a trap will be sent after booting (power on).
2.warmStart (defined in
When the machine warmstarts, a trap will be sent after booting (software reboot).
3.linkDown (defined in
When any of the links is down, a trap will be sent with the port number. The port number is its interface index under the interface group.
Port 1 : Ethernet LAN
SNMP Configuration |