Prestige 1600 Universal Access Concentrator
Field | Description | Example |
|
|
|
IP Policies | You can apply up to four IP Policy sets (from twelve) by |
|
| entering their numbers separated by commas, e.g., 3, 4, 6, |
|
| 11. |
|
|
|
|
Network | Please see the NAT chapter for a more detailed discussion on the | Full Feature |
Address | Network Address Translation feature. The choices are Full Feature, |
|
Translation | None and SUA Only. |
|
Address |
|
|
Mapping |
|
|
Set= |
|
|
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm…” to save your configuration, or press [ESC] at any time to cancel.
Note: When NAT is enabled you can connect the LAN port to any broadband device such as a cable modem or DSL device. You can also use the LAN port to connect to the ISP’s internal LAN and access the Internet using the ISP’s router.
5.5Collecting Internet Account Information
Before you configure your Prestige 1600 for Internet access, you need to collect your Internet account information from your ISP. Use Table
| Internet Account Information | Write your account information here |
IP Address of the ISP's Gateway | − |
|
|
Login Name | − |
Password−
5.6Internet Access using the Prestige 1600 Primary
Menu 4 allows you to enter the Internet access parameters in one screen. Menu 4 is actually a simplified setup for one of the remote nodes that you can access through menu 11. From the Main Menu, enter option 4 to go to Menu 4 - Internet Access Setup, as displayed in the next figure.
Internet Access |