Prestige 1600 Universal Access Concentrator

Step 1. You need to configure Address Mapping Set 1 from Menu 15.1 - Address Mapping Sets. Therefore you must choose the Full Feature option from the Network Address Translation field (in Menu 4 or Menu 11.3).

Step 2. Enter 15 from the Main Menu.

Step 3. Enter 1 to configure the Address Mapping Sets.

Step 4. Choose 1 to begin configuring this new set. Enter a Set Name, choose the Edit Action and then select 1 from Select Rule field. Press [ENTER] to confirm.

Step 5. Select Type= as One-to-Oneand enter the local Start IP as 192.168.1.10 (the IP address of FTP Server 1), the global Start IP as 10.132.50.1 (the first IGA). (See Figure 9-16)

Step 6. Repeat the previous step for rules 2 to 4 as outlined above.

Step 7. When finished, Menu 15.1.1 should look like as shown in Figure 9-17.The following figure shows how to configure the first rule.

Menu 15.1.1.1 Address Mapping Rule

Type= One-to-One

Local IP:

Start= 192.168.1.10

End = N/A

Global IP:

Start= 10.132.50.1

End = N/A

Press ENTER to Confirm or ESC to Cancel:

Figure 9-16 Example 3 - Menu 15.1.1.1

When you have configured all four rules, Menu 15.1.1 should look as follows.

Menu 15.1.1 - Address Mapping Rules

Set Name= Example3

Idx Local Start IP Local End IP

Global Start IP Global End IP

Type

------------------ --------------- --------------- --------------- ------

1.

192.168.1.10

 

10.132.50.1

1-1

2

192.168.1.11

 

10.132.50.2

1-1

3.

0.0.0.0

255.255.255.255

10.132.50.3

M-1

4.

 

 

10.132.50.3

Server

5.

 

 

 

 

6.

 

 

 

 

7.

 

 

 

 

8.

 

 

 

 

9.

 

 

 

 

10.

 

 

 

 

 

 

Action= Edit

Select Rule=

 

Press ENTER to Confirm or ESC to Cancel:

Figure 9-17 Example 3 Final Menu 15.1.1

Now you configure IGA3 to map to the web and mail server on the LAN.

Step 8. Enter 15 from the Main Menu.

NAT

9-13