Prestige 1600 Universal Access Concentrator

Menu 21.1.1 - Device Filter Rule

Filter #: 1,1

Filter Type= Device Filter Rule

Active= No

Offset= 0

Length= 0

Mask= N/A

Value= N/A

More= NoLog= None

Action Matched= Check Next Rule

Action Not Matched= Check Next Rule

Press ENTER to Confirm or ESC to Cancel:

Figure 10-8 Menu 21.1.2 - Device Filter Rule

The following table describes the fields in the Device Filter Rule Menu.

Table 10-5 Device Filter Rule Menu Fields

Field

Description

Option

 

 

 

Filter #

This is the filter set, filter rule co-ordinates, i.e., 2,3

 

 

refers to the second filter set and the third filter rule of

 

 

that set.

 

Filter Type

Press [SPACE BAR] to toggle between types of rules.

Device Filter

 

Parameters displayed below each type will be different.

Rule /

 

 

TCP/IP Filter

 

 

Rule

Active

Select Yes to turn on the filter rule.

Yes/No

 

 

 

Offset

Enter the starting byte of the data portion in the packet

Default = 0

 

that you wish to compare. The range for this field is

 

 

from 0 to 255.

 

Length

Enter the byte count of the data portion in the packet

Default = 0

 

that you wish to compare. The range for this field is 0

 

 

to 8.

 

Mask

Enter the mask (in Hexadecimal) to apply to the data

 

 

portion before comparison.

 

Value

Enter the value (in Hexadecimal) to compare with the

 

 

data portion.

 

More

If Yes, a matching packet is passed to the next filter

Yes / N/A

 

rule before an action is taken; else the packet is

 

 

disposed of according to the action fields.

 

 

If More is Yes, then Action Matched and Action Not

 

 

Matched will be N/A.

 

Log

Select the logging option from the following:

 

 

None - No packets will be logged.

None

 

Action Matched - Only packets that match the rule

Action

 

parameters will be logged.

Matched

 

Action Not Matched - Only packets that do not match

Action Not

 

the rule parameters will be logged.

Matched

10-10

Filter Configuration