Prestige 1600 Universal Access Concentrator

Chapter 7

Remote Node Configuration

This chapter shows you how to configure the profile and TCP/IP parameters of a remote node.

A remote node is required for placing calls to a remote gateway. A remote node represents both the gateway and the network behind it across a WAN connection. Note that when you use Menu 4 to set up Internet access, you are actually configuring a remote node.

7.1Remote Node Setup

Select menu option 11 from the Main Menu to enter Menu11.1 Remote Node Profile as shown next.

Menu 11 - Remote Node Setup

1.ChangeMe (ISP, NAT)

2.________

3.________

Enter Node # to Edit:

Figure 7-1 Menu 11 – Remote Node Setup

Enter a remote node index number to bring up the following screen.

Menu 11.1 - Remote Node Profile

Rem Node Name= myISP

Edit PPP Options= No

Active= Yes

Rem IP Addr= ?

 

Edit IP = No

Outgoing:

 

My Login= scci

Telco Option:

My Password= ********

Edit Frame Relay Options= No

Authen= CHAP/PAP

Input Filter Sets:

 

Protocol filters =

Device filters =

Output Filter Sets=

Protocol filters =

Device filters =

Press ENTER to CONFIRM or ESC to CANCEL:

Leave name field blank to delete profile

Please enter 0-9, a-z, A-Z, '-', or '_', or leave blank to DELETE profile

Figure 7-2 Menu 11.1 - Remote Node Profile

Remote Node Configuration

7-1