Prestige 1600 Universal Access Concentrator

Chapter 4

WAN Port Setup

This section describes setting up your WAN port including Frame Relay.

Select option 2 from the Main Menu by typing 2 at the menu selection number prompt. You will see a screen as shown next.

Menu 2 - WAN Port Setup

Clock Source = External

Port Speed = N/A

Edit Frame Relay Setup= No

Only change the default option (No) if you wish to configure the WAN port for frame relay.

Press Enter to Confirm or ESC to Cancel:

Figure 4-1 Menu 2 - WAN Port SetupTable 4-1 WAN Setup Menu Fields

Field

Description

Example

 

 

 

Clock Source

The device connected to the WAN port controls timing. The

External

 

P1600 currently only supports an external clock source.

 

Port Speed

Set by External Device

N/A

 

 

 

Edit Frame Relay

To configure the WAN port for frame relay move the cursor

 

Setup

to the Edit Frame Relay Setup= field, press the

 

 

[SPACEBAR] once to display Yes and then press

 

 

[ENTER]. This takes you to Menu 2.1.2 - Frame Relay

 

 

Setup shown ahead.

 

4.1Configuring The WAN Port For PPP over HDLC

The following diagram depicts the configuration scenario for running PPP over HDLC (High-level Data Link Control).

WAN Port Setup

4-1