|
| Prestige 1600 Universal Access Concentrator | |
|
|
|
|
| Field | Description |
|
|
|
|
|
| System Up Time | Displays the total elapsed time your system has been running. |
|
|
|
|
|
| Current Time | Displays the current time according to how you have the time set in |
|
|
| Menu 24.9 - System Maintenance - Time and Date Setting. |
|
| Current Date | Displays the current date according to how you have the date set in |
|
|
| Menu 24.9 - System Maintenance - Time and Date Setting. |
|
|
|
|
|
| Ethernet |
|
|
|
|
|
|
| Status | Shows the current speed and duplex mode of the LAN. |
|
|
|
|
|
| TX Pkts | The number of transmitted packets to LAN. |
|
|
|
|
|
| RX Pkts | The number of received packets from LAN. |
|
|
|
|
|
| Collisions | Number of collisions on the Ethernet. |
|
|
|
|
|
You see the next 24.1.1 screen when you have Frame Relay configured. DLCI, Port and the WAN IP address are shown for each PVC configured.
|
|
| Menu 24.1.1 - System Maintenance - Status |
|
| |||
DLCI | Index | TXPkts | RXPkts Errs | Tx(Byte/s) | Rx(Byte/s) | Up Time | ||
16 |
| 1 | 6 | 6 | 0 | 0 | 0 | 0:02:23 |
17 |
| 2 | 6 | 6 | 0 | 0 | 0 | 0:02:23 |
18 |
| 3 | 6 | 6 | 0 | 0 | 0 | 0:02:23 |
PVC | 1 | IP Addr: 182.168.10.1 | System Up Time: |
| 0:39:29 | |||
PVC | 2 | IP Addr: 192.168.11.1 | Current Time: 01:07:01 |
|
| |||
PVC | 3 | IP Addr: 192.168.12.1 | Current Date: Thu. Jan. 01, 1970 | |||||
Ethernet: |
|
|
|
|
|
| ||
Status: Down |
|
|
|
|
| |||
TX Pkts: 0 |
|
|
|
|
|
| ||
RX Pkts: 0 |
|
|
|
|
|
| ||
Collisions: 0 |
|
|
|
|
| |||
COMMANDS: | ||||||||
| Figure | |
| Table | |
|
|
Field | Description |
|
|
DLCI | This field shows you the DLCI (data link connection identifier) for |
| the virtual circuit. The DLCI changes for each hop through the |
| network it is not the address of the destination. It is a logical |
| identifier with local significance. |
Index | This is the virtual circuit index number. |
|
|
PVC 1, 2, 3 IP Addr | This displays the IP address of the respective virtual circuit. |
|
|
14.1.2 DSL Port Status
Enter 2 from Menu 24.1 to go to Menu 24.1.2 for detailed status information on the network module installed in slot 1. Menus 24.1.3 and 24.1.4 offer identical information on the network modules installed in slots 2 and 3. You see a “Slot 3 is empty, please make another selection” message if a slot (3 in this case) is empty. Note the asterisk
System Information and Maintenance |