Prestige 1600 Universal Access Concentrator

Menu 4 - Internet Access Setup

ISP's Name= ChangeMe

My Login= 1234

My Password= ********

Network Address Translation= SUA Only

My WAN Addr= 0.0.0.0

Address Mapping Set= N/A

Edit Frame Relay Options= No

Press ENTER to Confirm or ESC to Cancel:

Figure 5-2 Menu 4 - Internet Access Setup

Table 5-4contains instructions on how to configure your Prestige 1600 for Internet access.

Table 5-4 Internet Access Setup Menu Fields

Field

Description

Observation

 

 

 

ISP's Name

Enter the name of your Internet Service Provider. (This

myISP

 

information is for identification purposes only.)

 

My Login

Enter the login name assigned to you by your ISP.

(required)

Name

 

 

My Password

Enter the password associated with the login name

(required)

 

above. Note that this login name/password pair is only for

 

 

your Prestige 1600 to connect to the ISP's gateway. For

 

 

TCP/IP applications, e.g., FTP, you will need a separate

 

 

login name and password for each server.

 

Network

See the NAT Chapter for more details on this field and

 

Address

Address Mapping Set below.

 

Translation

 

 

My WAN Addr

Some implementations, especially the UNIX derivatives,

 

 

require the WAN link to have a separate IP network

 

 

number from the LAN and each end must have a unique

 

 

address within the WAN network number. If this is the

 

 

case, enter the IP address assigned to the WAN port of

 

 

your Prestige 1600.

 

 

Note that this is the address assigned to your local

 

 

Prestige 1600, not the remote router.

 

Address

See the NAT Chapter

 

Mapping Set

 

 

Edit Frame

Please see the WAN Port Setup chapter for a full

 

Relay Options

discussion of this feature.

 

Press [ENTER] at the message “Press ENTER to Confirm...” to confirm your configuration, or press [ESC] at any time to cancel.

5-6

Internet Access