Prestige 1600 Universal Access Concentrator

9.2.2Configuring NAT

To configure NAT, enter 15 from the Main Menu to bring up the following screen.

Menu 15 – NAT Setup

1.Address Mapping Sets

2.Server Set

Enter Menu Selection Number:

Figure 9-4 Menu 15 NAT Setup

9.2.3Address Mapping Sets and NAT Server Sets:

Use the Address Mapping Sets menus and submenus to create the mapping table for translation. Each remote node must specify which NAT Address Mapping Set to use. You can only configure set 1 to 4, which supports all mapping types as outlined in Table 9-1. Set 255 is used for SUA. When you select SUA Only, the SMT will use the pre-configured Set 255 (read only) - see section 9.1.5.

Enter 1 to bring up Menu 15.1 - Address Mapping Sets.

Menu 15.1 - Address Mapping Sets

1.NAT_SET1

2.NAT_SET2

3.NAT_SET3

4.NAT_SET4

255. SUA (read only)

Figure 9-5 Menu 15.1 Address Mapping Sets

Let’s look first at Option 255 (see section 9.1.5). The fields in this menu cannot be changed. Entering 255 brings up the following screen.

NAT

9-5