Prestige 1600 Universal Access Concentrator

Please note that if the Set Name field is left blank, the entire set will be deleted.

Menu 15.1.1 - Address Mapping Rules

Set Name= NAT_SET1

Idx Local Start IP Local End IP

Global Start IP Global End IP

Type

------------------ --------------- --------------- --------------- ------

1.

2

3.

4.

5.

6.

7.

8.

9.

10.

Action= Edit

Select Rule=

Press ENTER to Confirm or ESC to Cancel:

Figure 9-7 First Set in Menu 15.1.1

The Type, Local and Global Start/End IPs are configured in Menu 15.1.1.1 (described later) and the

values are displayed here.

9.2.4Ordering Your Rules

Ordering your rules is important because the Prestige applies the rules in the order that you specify. When a rule matches the current packet, the Prestige takes the corresponding action and the remaining rules are ignored. If there are any empty rules before your new configured rule, your configured rule will be pushed up by that number of empty rules. For example, if you have already configured rules 1 to 6 in your current set and now you configure rule number 9. In the set summary screen, the new rule will be rule 7, not 9.

Now if you delete rule 4, rules 5 to 7 will be pushed up by 1 rule, so as old rules 5, 6 and 7 become new rules 4, 5 and 6.

The description of the other fields is as described above. The Type, Local and Global Start/End IPs are configured in Menu 15.1.1.1 (described later) and the values are displayed here.

Table 9-4 Menu 15.1.1

 

Field

Description

Option

 

 

 

 

 

 

 

Set Name

Enter a name for this set of rules. This is a required field.

 

 

 

 

Please note that if this field is left blank, the entire set will be

 

 

 

 

deleted.

 

 

 

 

 

 

 

 

Action

There are 4 actions. The default is Edit. Edit means you

Edit

 

 

 

want to edit a selected rule (see following field). Insert

Insert Before

 

 

 

Before means to insert a rule before the rule selected. The

Delete

 

 

 

rules after the selected rule will then be moved down by one

Save Set

 

 

 

rule. Delete means to delete the selected rule and then all

 

 

 

 

the indices of the rules after the selected one will be

 

 

 

 

decremented by 1. Save Set means to save the whole set

 

 

 

 

(note when you choose this action, the Select Rule item will

 

 

 

 

be disabled).

 

 

 

Select Rule

When you choose Edit, Insert Before or Delete in the

 

 

 

 

previous field the cursor jumps to this field to allow you to

 

 

 

 

select the rule to apply the action in question.

 

 

 

 

 

 

 

NAT

9-7