Prestige 1600 Universal Access Concentrator

The ISP assigns an IP address of a.b.c.1 to the Prestige primary and IP addresses of a.b.c.2 to a.b.c.5 to the Prestige secondary units. The private IP addresses for the primary and secondaries are 192.168.1.1 to 192.168.1.5 inclusive. We wish to map public IP addresses a.b.c.2 to a.b.c.5 to the secondary units.

Please note that “a.b.c.digit” represents a real, public IP address and that alphabetical characters

cannot be accepted as parts of an IP address.

13.4.1 Procedure to Set Up NAT for Remote Management

Step 1. Pick an available NAT set from Menu 15.1. Let’s say set 1 is available.

Menu 15.1 - Address Mapping Sets

1.NAT_SET1

2.NAT_SET2

3.NAT_SET3

4.NAT_SET4

255. SUA (read only)

Figure 13-3 Pick An Address Mapping Set

Step 2. Go to Menu 15.1.1.1 (see the NAT chapter for details on this) and configure the screen as shown.

Menu 15.1.1.1 Address Mapping Rule

Type= One-to-One (range)

Local IP:

Start= 192.168.1.2

End = 192.168.1.5

Global IP:

Start= a.b.c.2

End = a.b.c.5

Press ENTER to Confirm or ESC to Cancel:

Figure 13-4 Address Mapping Rule

Step 3. After you configure this screen, press [ENTER] to go back to this screen.

Remote Management

13-3