Prestige 1600 Universal Access Concentrator

Menu 4 - Internet Access Setup

ISP's Name= ChangeMe

My Login= 1234

My Password= ********

Network Address Translation= SUA Only

My WAN Addr= 0.0.0.0

Address Mapping Set= N/A

Press ENTER to Confirm or ESC to Cancel:

Figure 9-2 Applying NAT for Internet Access

The following figure shows how you apply NAT to the remote node in Menu 11.1. Step 1. Enter 11 from the Main Menu.

Step 2. Move the cursor to the Edit IP field, press the [SPACEBAR] to toggle the default No to Yes, then press [ENTER] to bring up Menu 11.3 - Remote Node Network Layer Options.

Menu 11.3 - Remote Node Network Layer Options

Rem IP Addr: 0.0.0.0

Rem Subnet Mask= 0.0.0.0

My WAN Addr= 0.0.0.0

Network Address Translation= SUA Only

Address Mapping Set= N/A

Metric= 2

Private= No

RIP Direction= None

Version= RIP-1

Multicast= N/A

IP Policies=

Enter here to CONFIRM or ESC to CANCEL:

Figure 9-3 Applying NAT to the Remote Node

The following table describes the options for Network Address Translation.

 

Table 9-2 Applying NAT in Menus 4 & 11.3

Field

Description

 

 

Network Address

Full Feature: You can configure any of the 6 mapping types

Translation

described in Table 9-1.

 

SUA Only: When you select this option the SMT will use Address

 

Mapping Set 255 (Menu 15.1 - see section 9.2.3). It is a convenient,

 

pre-configured, read only Many-to-1 port mapping set, sufficient for

 

most purposes (especially for users with just one public IP) and

 

helpful to people already familiar with SUA in previous ZyNOS

 

versions. Note that there is also a Server type whose IGA is 0.0.0.0

 

in this set.

 

None: NAT is disabled when you select this option.

 

 

Address Mapping

This is the Address Mapping Set that you wish to apply to this node.

Set

Set 255 is reserved for SUA.

 

 

9-4

NAT