ZyXEL Communications 310 Call Scheduling, 14.1 Introduction, 14.2 Schedule Setup, This chapter shows you how to setup call time periods for remote nodes, Menu 26 — Schedule Setup

Prestige 310 Broadband Sharing Gateway

Chapter 14

Call Scheduling

This chapter shows you how to setup call time periods for remote nodes.

14.1 Introduction

The call scheduling feature allows the Prestige to manage a remote node and dictate when a remote node should be called and for how long. This feature is similar to the scheduler in a video cassette recorder (you can record programs at times that you specify). You can apply up to four schedule sets in Menu 11.1 — Remote Node Profile.

14.2 Schedule Setup

From the main menu, enter 26 to access Menu 26 — Schedule Setup as shown next.

	Menu 26 - Schedule Setup
Schedule		Schedule
Set #	Name	Set #	Name
------	------------------	------	------------------
1	______________	7	______________
2	______________	8	______________
3	______________	9	______________
4	______________	10	______________
5	______________	11	______________
6	______________	12	______________

Enter Schedule Set Number to Configure=

Edit Name=

Press ENTER to Confirm or ESC to Cancel:

Figure 14-1 Schedule Setup

Lower numbered sets take precedence over higher numbered sets thereby avoiding scheduling conflicts. For example, if sets 1, 2 ,3 and 4 in are applied in the remote node then set 1 will take precedence over set 2, 3 and 4 as the Prestige, by default, applies the lowest numbered set first. Set 2 will take precedence over set 3 and 4, and so on.

You can design up to 12 schedule sets but you can only apply up to four schedule sets for a remote node.

Call Scheduling 14-1