ZyXEL Communications 310 12.1.1 Internal SPTGEN File Modification - Important Points to Remember, Field, Input, Input, Input, Field Name, Configured, Allowed column

Prestige 310 Broadband Sharing Gateway

This is the name	This is the Field Name column.
of the menu.	This is the name of the field as
	seen in the corresponding SMT
	screen. Example: Configured

One “=” sign, followed by one space, must precede everything you input.

/ Menu 1 General Setup
	100000000	=	Configured	<0(No)	1(Yes)>	=	1
	100000001	=	System Name	<Str>		=	P310
	100000004	=	Route IP	<0(No)	1(Yes)>	=	1
	100000007	=	Domain Name Configured	<0:No	1:Yes>	=	1
	100000009	=	Domain Name Manual	<0:No	1:Yes>	=	0
	100000010	=	Domain Name	<Str>		=

This is the Field	This is the Parameter Values	The Input column.
Identification Number	Allowed column.	Input values to the
column.	This column defines acceptable	right of the “=”
This column	parameters. Parameters are usually	sign.
numerically identifies	numbers, but can sometimes be	Make sure one
the Field Name column	strings (<Str> indicates a string). All	equal sign,
entries.	parameters should be entered in the	followed by one
Example: 100000000	Input column.	space, precedes
	Example: <0(No) 1(Yes)>	your input.

Figure 12-1 Configuration Text File Format — Column DescriptionsDO NOT alter or delete any field except parameters in the Input column.

For more text file examples, refer to the Internal SPTGEN appendix.

12.1.1 Internal SPTGEN File Modification - Important Points to Remember

•Entries in the Input column must not exceed 40 characters per line. If your input exceeds this limit, make sure you press [ENTER] to start a new line.

•Each parameter you enter must be preceded by one “=”sign and one space.

•Some parameters are dependent on others. For example, if you disable the Configured field in menu 1 (see Figure 12-1), then you disable every field in this menu.

12-2 Internal SPTGEN