ZyXEL Communications 310 Table 4-1Fields in Menu 11.1 (Ethernet Encapsulation)

Prestige 310 Broadband Sharing Gateway

Table 4-1 Fields in Menu 11.1 (Ethernet Encapsulation)

FIELD	DESCRIPTION	EXAMPLE
Rem Node Name	Enter a descriptive name for the remote node. This field can	LAoffice
	be up to eight characters.
Active	Press [SPACE BAR] to select Yes (activate remote node) or	Yes
	No (deactivate remote node).
Encapsulation	Ethernet is the default encapsulation. Press the [SPACE	Ethernet
	BAR] if you wish to change to PPPoE or PPTP
	encapsulation.
Service Type	Press [SPACE BAR] to select from Standard, RR-Toshiba	Standard
	(RoadRunner Toshiba authentication method), RR-Manager
	(RoadRunner Manager authentication method) or, RR-
	Telstra (RoadRunner Telstra authentication method).
	Choose one of the RoadRunner methods if your ISP is Time
	Warner's RoadRunner; otherwise choose Standard.

Note: xDSL users must choose the Standard option only. The Server IP, My Login IP and My Password fields are not applicable in this case.

Service Name	This is valid only when you have chosen PPPoE	poellc
	encapsulation. If you are using PPPoE encapsulation, then
	type the name of your PPPoE service here.
Outgoing
My Login	This field is applicable for PPPoE encapsulation only. Enter	jim
	the login name assigned by your ISP when the Prestige
	calls this remote node. Some ISPs append this field to the
	Service Name field above (for example, jim@poellc) to
	access the PPPoE server.
My Password	Enter the password assigned by your ISP when the Prestige	*****
	calls this remote node. Valid for PPPoE encapsulation only.
Server IP	This field is valid for RoadRunner service type only. The
	Prestige will find the RoadRunner Server IP automatically if
	this field is left blank. If it does not, then you must enter the
	authentication server IP address here.
Route	This field refers to the protocol that will be routed by your	IP
	Prestige – IP is the only option for the Prestige 10.
Edit IP	This field leads to a “hidden” menu. Press [SPACE BAR] to	Yes
	select Yes and press [ENTER] to go to Menu 11.3 —
	Remote Node Network Layer Options.

4-2 Remote Node Setup