ZyXEL Communications 310 Table 7-2Rule Abbreviations Used, Table 7-1Abbreviations Used in the Filter Rules Summary Menu

Prestige 310 Broadband Sharing Gateway

	Table 7-1 Abbreviations Used in the Filter Rules Summary Menu
FIELD		DESCRIPTION
#		The filter rule number: 1 to 6.
A		Active: “Y” means the rule is active. “N” means the rule is inactive.
Type		The type of filter rule: “GEN” for Generic, “IP” for TCP/IP.
Filter Rules		These parameters are displayed here.
M		More.
		“Y” means there are more rules to check which form a rule chain with the present rule.
		An action cannot be taken until the rule chain is complete.
		“N” means there are no more rules to check. You can specify an action to be taken
		i.e., forward the packet, drop the packet or check the next rule. For the latter, the next
		rule is independent of the rule just checked.
m		Action Matched.
		“F” means to forward the packet immediately and skip checking the remaining rules.
		“D” means to drop the packet.
		“N“ means to check the next rule.
n		Action Not Matched.
		“F” means to forward the packet immediately and skip checking the remaining rules.
		“D” means to drop the packet.
		“N” means to check the next rule.

The protocol dependent filter rules abbreviation are listed as follows:Table 7-2 Rule Abbreviations Used

ABBREVIATIONDESCRIPTION

IP

Pr	Protocol
SA	Source Address
SP	Source Port number
DA	Destination Address
DP	Destination Port number

GEN

Off Offset

Len Length

Refer to the next section for information on configuring the filter rules.

7-6 Filter Configuration