ZyXEL Communications 310 Edit, Type, Local, Action, address, Global Start/End IPs, Table 6-5Fields in Menu, Menu 15.1.1.1 — Address Mapping Rule

Prestige 310 Broadband Sharing Gateway

Table 6-5 Fields in Menu 15.1.1

	FIELD	DESCRIPTION	EXAMPLE
Set Name		Enter a name for this set of rules. This is a required field. If this	NAT_SET
		field is left blank, the entire set will be deleted.
Action		The default is Edit. Edit means you want to edit a selected rule	Edit
		(see following field). Insert Before means to insert a rule before
		the rule selected. The rules after the selected rule will then be
		moved down by one rule. Delete means to delete the selected rule
		and then all the rules after the selected one will be advanced one
		rule. None disables the Select Rule item.
Select Rule		When you choose Edit, Insert Before or Delete in the previous	1
		field the cursor jumps to this field to allow you to select the rule to
		apply the action in question.

You must press [ENTER] at the bottom of the screen to save the whole set. You must do this again if you make any changes to the set – including deleting a rule.

No changes to the set take place until this action is taken.

Selecting Edit in the Action field and then selecting a rule brings up the following menu, Menu 15.1.1.1 — Address Mapping Rule in which you can edit an individual rule and configure the Type, Local and Global Start/End IPs.

An End IP address must be numerically greater than its corresponding IP Startaddress.

Menu 15.1.1.1 Address Mapping Rule

Type= One-to-One

Local IP:

Start=

End = N/A

Global IP:

Start=

End = N/A

Press ENTER to Confirm or ESC to Cancel:

Press Space Bar to Toggle.

Figure 6-9 Menu 15.1.1.1 — Editing/Configuring an Individual Rule in a Set

Network Address Translation (NAT) 6-11