Prestige 310 Broadband Sharing Gateway

Figure 6-16 NAT Example 3

Step 1. In this case you need to configure Address Mapping Set 1 from Menu 15.1 — Address Mapping

Sets. Therefore you must choose the Full Feature option from the Network Address Translation field (in menu 4 or menu 11.3) in Figure 6-17.

Step 2. Then enter 15 from the main menu.

Step 3. Enter 1 to configure the Address Mapping Sets.

Step 4. Enter 1 to begin configuring this new set. Enter a Set Name, choose the Edit Action and then enter 1 for the Select Rule field. Press [ENTER] to confirm.

Step 5. Select Type as One-to-One(direct mapping for packets going both ways), and enter the local Start IP as 192.168.1.10 (the IP address of FTP Server 1), the global Start IP as 10.132.50.1 (our first IGA). (See Figure 6-18).

Step 6. Repeat the previous step for rules 2 to 4 as outlined above.

Step 7. When finished, menu 15.1.1 should look like as shown in Figure 6-19.

6-18

Network Address Translation (NAT)