ZyXEL Communications 310 11.3 Time and Date Setting, Figure 11-5Call History, Table 11-2Call History Fields

Prestige 310 Broadband Sharing Gateway

		Menu 24.9.2 - Call History
Phone Number	Dir	Rate	#call	Max	Min	Total
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
		Enter Entry to Delete(0 to exit):
			Figure 11-5 Call History
		Table 11-2 Call History Fields
FIELD				DESCRIPTION
Phone Number	The PPPoE service names are shown here.
Dir	This shows whether the call was incoming or outgoing.
Rate	This is the transfer rate of the call.
#call	This is the number of calls made to or received from that telephone
	number.
Max	This is the length of time of the longest telephone call.
Min	This is the length of time of the shortest telephone call.
Total	This is the total length of time of all the telephone calls to/from that
	telephone number.

You may enter an entry number to delete it or ‘”0” to exit.

11.3 Time and Date Setting

There is no Real Time Chip (RTC) in the Prestige, so there is a software mechanism to set the time manually or get the current time and date from an external server when you turn on your Prestige. Menu 24.10 allows you to update the time and date settings of your Prestige. The real time is then displayed in the Prestige error logs and firewall logs. If you do not choose a time service protocol that your timeserver will send when you turn on the Prestige, then you can enter the time manually but each time the system is booted, the time and date will be reset to 2000/01/01 00:00:00.

Select menu 24 in the main menu to open Menu 24 — System Maintenance, as shown next.

11-4 System Maintenance and Information