Prestige 310 Broadband Sharing Gateway

Chapter 11

System Maintenance and Information

This chapter leads you through SMT menus 24.8 to 24.11.

11.1 Command Interpreter Mode

The Command Interpreter (CI) is a part of the main router firmware. The CI provides much of the same functionality as the SMT, while adding some low-level setup and diagnostic functions. The CI can be entered from the SMT by selecting menu 24.8. Access can be either by Telnet or by a serial connection to the console port, although some commands are only available with a serial connection. See the support CD or the zyxel.com web site for more detailed information on CI commands. Enter 8 from Menu 24 — System Maintenance. A list of valid commands can be found by entering “help” or “?” at the command prompt. Type “exit” and press [ENTER] to return to the SMT main menu when finished.

Menu 24 - System Maintenance

1.System Status

2.System Information and Console Port Speed

3.Log and Trace

4.Diagnostic

5.Backup Configuration

6.Restore Configuration

7.Firmware Update

8.Command Interpreter Mode

9.Call Control

10.Time and Date Setting

11.Remote Management Setup

Enter Menu Selection Number:

Figure 11-1 Command Mode in Menu 24
System Maintenance and Information

11-1