Prestige 310 Broadband Sharing Gateway

LAN computers dynamically take turns using the mapping based on the trigger port. There is no need to reconfigure a new IP address each time you want a different computer (as you would with Port Forwarding) to use the application.

6.6.1 Two Points To Remember About Trigger Ports

1.Trigger events only happen on data coming from inside the Prestige to the outside.

2.If an application needs a continuous data stream, that port (range) will be tied up so that another computer on the LAN can’t trigger it.

Only one LAN computer can use a trigger port (range) at a time.Enter 3 in menu 15 to display Menu 15.3 — Trigger Port Setup, shown next.

 

 

 

 

 

Menu 15.3 - Trigger Port Setup

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Incoming

Trigger

 

 

 

 

 

 

 

Rule

Name

Start Port

End Port

Start Port

End Port

 

 

 

 

 

 

 

----------------------------------------------------------------------

 

 

 

 

 

 

 

1.

Real Audio

6970

7170

7070

7070

 

 

 

 

 

 

2.

 

0

0

0

 

0

 

 

 

 

 

 

3.

 

0

0

0

 

0

 

 

 

 

 

 

4.

 

0

0

0

 

0

 

 

 

 

 

 

5.

 

0

0

0

 

0

 

 

 

 

 

 

6.

 

0

0

0

 

0

 

 

 

 

 

 

7.

 

0

0

0

 

0

 

 

 

 

 

 

8.

 

0

0

0

 

0

 

 

 

 

 

 

9.

 

0

0

0

 

0

 

 

 

 

 

 

10.

 

0

0

0

 

0

 

 

 

 

 

 

11.

 

0

0

0

 

0

 

 

 

 

 

 

12.

 

0

0

0

 

0

 

 

 

 

 

 

 

Press ENTER to Confirm or ESC to Cancel:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Figure 6-24 Menu 15.3—Trigger Port Setup

 

 

 

 

 

 

 

 

 

Table 6-8 Menu 15.3—Trigger Port Setup Description

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FIELD

 

 

DESCRIPTION

 

 

 

EXAMPLE

Rule

This is the rule index number.

 

 

 

 

1

 

 

 

 

 

 

 

 

 

Name

Enter a unique name for identification purposes. You may enter up to 15

 

Real Audio

 

 

 

characters in this field. All characters are permitted - including spaces.

 

 

 

 

 

 

 

 

 

 

 

 

Incoming

Incoming is a port (range) that accepts WAN traffic. It is the “listening “ port

 

 

 

 

 

 

 

of the client software on LAN computers.

 

 

 

 

 

 

Start Port

Enter a port number or the starting port number in a range of port numbers.

 

6970

 

 

 

 

 

 

 

 

 

 

 

 

 

Network Address Translation (NAT)

6-23