Prestige 310 Broadband Sharing Gateway

One of the benefits of PPPoE is the ability to let end users access one of multiple network services, a function known as dynamic service selection. This enables the service provider to easily create and offer new IP services for specific users.

Operationally, PPPoE saves significant effort for both the end user and ISP/carrier, as it requires no specific configuration of the broadband modem at the customer site.

By implementing PPPoE directly on the Prestige (rather than individual computers), the computers on the LAN do not need PPPoE software installed, since the Prestige does that part of the task. Furthermore, with NAT, all of the LAN's computers will have access.

If you enable PPPoE in menu 4, you will see the next screen. For more information on PPPoE, please refer to the PPPoE Appendix.

Menu 4 - Internet Access Setup

ISP's Name= ChangeMe

Encapsulation= PPPoE

Service Type= N/A

My Login=

My Password= ********

Idle Timeout= 300

IP Address Assignment= Dynamic

IP Address= N/A

IP Subnet Mask= N/A

Gateway IP Address= N/A

Network Address Translation = SUA Only

Press ENTER to Confirm or ESC to Cancel:

Figure 3-8 Internet Access (PPPoE)Table 3-8 New Fields in Menu 4 (PPPoE) Screen

FIELD

DESCRIPTION

EXAMPLE

 

 

 

Encapsulation

Press the [SPACE BAR] and then press [ENTER] to choose

PPPoE

 

PPPoE. The encapsulation method influences your choices for

 

 

IP Address.

 

 

 

 

Idle Timeout

This value specifies the time in seconds that elapses before the

300

 

Prestige automatically disconnects from the PPPoE server.

(default)

3-12

Internet Access