ZyXEL Communications 310 Table 4-7Traffic Redirect Setup, Figure 4-10Menu 11.6 — Traffic Redirect Setup

Prestige 310 Broadband Sharing Gateway

Menu 11.6 - Traffic Redirect Setup

Active = Yes

Configuration:

Backup Gateway IP Address = 0.0.0.0

Check WAN IP Address = 0.0.0.0

Fail Tolerance = 5

Check Connection Every:

Timeout = 10

Press ENTER to Confirm or ESC to Cancel:

Press Space Bar to Toggle.

Figure 4-10 Menu 11.6 — Traffic Redirect SetupTable 4-7 Traffic Redirect Setup

FIELD	DESCRIPTION	EXAMPLE
Active	Press [SPACE BAR] and select Yes (to enable) or No (to disable)	Yes
	traffic redirect setup. The default is No.
	When the Active field is Yes, you must configure every field in this
	screen unless you are using PPPoE or PPTP encapsulation (except
	Check WAN IP Address and Timeout).
	If you don’t configure these fields and are using PPTP or PPPoE
	encapsulation, then the Prestige checks the PPPoE channel or PPTP
	tunnel to determine if the WAN connection is down.
Configuration:
Backup Gateway	Enter the IP address of your backup gateway in dotted decimal	0.0.0.0
IP Address	notation.
	The Prestige automatically forwards traffic to this IP address if the
	Prestige’s Internet connection terminates.
Check WAN IP	Configuration of this field is optional. If you do not enter an IP address	0.0.0.0
Address	here, the Prestige will use the default gateway IP address.
	Configure this field to test your Prestige’s WAN accessibility. Enter the
	IP address of a reliable nearby computer (for example, your ISP’s DNS
	server address).
	If you are using PPTP or PPPoE Encapsulation, enter “0.0.0.0” to
	configure the Prestige to check the PVC (Permanent Virtual Circuit) or
	PPTP tunnel.
Fail Tolerance	Enter the number of times your Prestige may attempt and fail to	5
	connect to the Internet before traffic is forwarded to the backup

Remote Node Setup 4-13