Prestige 310 Broadband Sharing Gateway

Menu 11.3 - Remote Node Network Layer Options

IP Address Assignment= Dynamic

IP Address= N/A

IP Subnet Mask= N/A

Gateway IP Addr= N/A

Network Address Translation= SUA only

Metric= N/A

Private= N/A

RIP Direction= None

Version= N/A

Multicast= None

Enter here to CONFIRM or ESC to CANCEL:

Press Space Bar to Toggle.

Figure 4-4 Remote Node Network Layer Options

The next table gives you instructions about configuring remote node network layer options.

Table 4-4 Remote Node Network Layer Options Menu Fields

FIELD

DESCRIPTION

EXAMPLE

IP Address

If your ISP did not assign you an explicit IP address, select

Dynamic

Assignment

Dynamic; otherwise select Static and enter the IP address & subnet

 

 

mask in the following fields.

 

IP Address

If you have a static IP address, enter the IP address assigned to you

 

 

by your ISP.

 

IP Subnet

If you have a static IP assignment, enter the subnet mask assigned

 

Mask

to you.

 

 

 

 

Gateway IP

If you have a static IP assignment, enter the gateway IP address

 

Addr

assigned to you.

 

 

 

 

Network

Use the [SPACE BAR] to select either Full Feature, None or SUA

SUA Only

Address

Only. See the NAT chapter for a full discussion of this feature.

 

Translation

 

 

 

 

 

Metric

This field is valid only for PPTP/PPPoE encapsulation. The metric

3

 

represents the “cost” of transmission for routing purposes. IP routing

 

 

uses hop count as the measurement of cost, with a minimum of 1 for

 

 

directly connected networks. Enter a number that approximates the

 

 

cost for this link. The number need not be precise, but it must be

 

 

between 1 and 15. In practice, 2 or 3 is usually a good number.

 

Private

This field is valid only for PPTP/PPPoE encapsulation. This

Yes

 

parameter determines if the Prestige will include the route to this

 

Remote Node Setup

4-7