ZyXEL Communications 310 2.5Navigating the SMT Interface, 2.4.2 Entering the Password, Figure 2-3Initial Screen, Figure 2-4Password Screen

Prestige 310 Broadband Sharing Gateway

Copyright (c) 1994 - 2002 ZyXEL Communications Corp. initialize ch =0, ethernet address: 00:a0:c5:27:84:52 initialize ch =1, ethernet address: 00:a0:c5:27:84:53 Press ENTER to continue...

Figure 2-3 Initial Screen

2.4.2 Entering the Password

The login screen appears after you press [ENTER], prompting you to enter the password, as shown next.

For your first login, enter the default password "1234"." As you type the password, the screen displays an "X" for each character you type.

Note that if there is no activity for longer than five minutes after you log in, your Prestige will automatically log you out and display a blank screen. If you see a blank screen, press [ENTER] to display the login screen again.

Enter Password : XXXX

Figure 2-4 Password Screen

2.5Navigating the SMT Interface

The SMT (System Management Terminal) is the interface that you use to configure your Prestige.

Several operations that you should be familiar with before you attempt to modify the configuration are listed next.

Hardware Installation and Initial Setup 2-5