ZyXEL Communications 310 3.3Internet Access Setup, 3.3.1 Ethernet Encapsulation, Ethernet, Ethernet, Table 3-5IP Alias Setup Menu Fields, In the Encapsulation field in menu 4, choose:

Prestige 310 Broadband Sharing Gateway

Table 3-5 IP Alias Setup Menu Fields

FIELD	DESCRIPTION	EXAMPLE
IP Alias	Choose Yes to configure the LAN network for the Prestige.	Yes
IP Address	Enter the IP address of your Prestige in dotted decimal notation	192.168.2.1
IP Subnet Mask	Your Prestige will automatically calculate the subnet mask based on	255.255.255.0
	the IP address that you assign. Unless you are implementing
	subnetting, use the subnet mask computed by the Prestige.
RIP Direction	Press the [SPACE BAR] to select the RIP direction.	None
	Options are None, Both, In Only or Out Only.
Version	Press the [SPACE BAR] to select the RIP version.	RIP-1
	Options are RIP-1, RIP-2Bor RIP-2M.
Incoming	Enter the filter set(s) you wish to apply to the incoming traffic
Protocol Filters	between this node and the Prestige.
Outgoing	Enter the filter set(s) you wish to apply to the outgoing traffic between
Protocol Filters	this node and the Prestige.

When you have completed this menu, press [ENTER] at the prompt [Press ENTER to Confirm…] to save your configuration, or press [ESC] at any time to cancel.

3.3Internet Access Setup

You will see three different menu 4 screens depending on whether you chose Ethernet, PPTP or PPPoE encapsulation.

In the Encapsulation field in menu 4, choose:•Ethernet when the WAN port is used as a regular Ethernet.•PPTP or PPPoE if you have a dial-up connection to the Internet.

3.3.1 Ethernet Encapsulation

You must choose the Ethernet option when the WAN port is used as a regular Ethernet. If you choose Ethernet in menu 4 you will see the next screen.

3-8 Internet Access