Prestige 645 ADSL Internet Access Router

Menu 24.4 - System Maintenance - Diagnostic

ADSL

System

1. Reset ADSL

21.

Reboot System

 

22.

Command Mode

TCP/IP

12. Ping Host

Enter Menu Selection Number:

Host IP Address= N/A

Figure 10-7 Menu 24.4 - System Maintenance - Diagnostic

Follow the procedure below to get to Diagnostic

Step 1. From the main menu, enter 24 to open Menu 24 - System Maintenance.

Step 2. From this menu, enter 4 to open Menu 24.4 - System Maintenance - Diagnostic.

The following table describes the diagnostic tests available in menu 24.4 for your Prestige and the connections.

 

Table 10-4 System Maintenance Menu Diagnostic

 

 

FIELD

DESCRIPTION

Reset ADSL

This command re-initializes the ADSL link to the telephone company.

Ping Host

This diagnostic test pings the host, which determines the functionality of the

 

TCP/IP protocol on both systems and the links in between.

Reboot System

This option reboots the Prestige.

 

 

Command Mode

This option allows you to enter the command mode. This mode allows you to

 

diagnose and test your Prestige using a specified set of commands.

10.5 Command Interpreter Mode

The Command Interpreter (CI) is a part of the main system firmware. The CI provides much of the same functionality as the SMT, while adding some low-level setup and diagnostic functions. The CI can be entered from the SMT by selecting menu 24.8. Access is by Telnet. For more detailed information on CI commands see the Support Notes on the Supporting CD. Enter 8 from Menu 24 - System Maintenance. A list of valid commands can be found by typing help or ? at the command prompt. Type “exit” to return to the SMT main menu when finished.

System Maintenance

10-9