Prestige 645 ADSL Internet Access Router

Chapter 2

Hardware Installation & Initial Setup

This chapter describes the physical features and cable connections of the Prestige and how to access and use the SMT interface for configuration.

2.1Front Panel LEDs of the P645R

The LED indicators on the front panel indicate the operational status of the Prestige 645R. The table below the diagram describes the LED functions:

 

Figure 2-1 Prestige 645R Front Panel

 

Table 2-1 Front Panel LED Description

 

 

LED NAMEDESCRIPTION
PWR

The PWR (power) LED is on when power is applied to the Prestige.

 

 

SYS

A steady on SYS (system) LED indicates the Prestige is on and functioning properly

 

while an off SYS LED indicates the system is not ready or has a malfunction. The

 

SYS LED blinks when the system is rebooting.

LAN 10M

A steady light indicates a 10Mb Ethernet connection. The LED blinks when data is

 

being sent/received.

LAN 100M

A steady light indicates a 100Mb Ethernet connection. The LED blinks when data is

 

being sent/received.

DSL

The ADSL LED is on when the Prestige is connected successfully to a DSLAM. The

 

LED blinks during ADSL line initialization. The LED is off when the link is down.

ACT

The ACT LED blinks during data transfer via the ADSL line. The LED is off when no

 

data is being transferred on the ADSL line.

Hardware Installation & Setup

2-1