Prestige P645 ADSL Internet Access Router

Table 5-1 TCP/IP related fields in Remote Node Profile

FIELD

DESCRIPTION

EXAMPLE

Route

Make sure IP is among the protocols in the Route field in

IP

 

Menu 11.1 - Remote Node Profile. Options are IP, IPX,

 

 

IP+IPX and None; although with ENET ENCAP the only

 

 

available protocol is IP.

 

Rem IP Address

Enter the IP address of the remote gateway in Menu 11.1 -

0.0.0.0

 

Remote Node Profile. You must fill in either the remote

 

 

Prestige WAN IP address or the remote Prestige LAN IP

 

 

address. This depends on the remote router’s WAN IP i.e., for

 

 

the (remote) Prestige, the My WAN Addr settings in Menu

 

 

11.3 – Remote Node Network Layer Options). For example

 

 

(see Figure 5-4), if the remote WAN IP is set to 172.16.0.2 (the

 

 

remote router’s WAN IP), then you should enter 172.16.0.2 in

 

 

the Rem IP Address field. If the remote WAN IP is 0.0.0.0,

 

 

then enter 192.168.1.1(the remote router’s LAN IP) in the Rem

 

 

IP Address field).

 

Edit IP/IPX/Bridge

Press the [SPACE BAR] to select Yes in this field and then

No

 

press [ENTER] to go to Menu 11.3 - Remote Node Network

 

 

Layer Options.

 

The following table shows the TCP/IP related fields in Menu 11.3 - Remote Node Network Layer Options.

Menu 11.3 - Remote Node Network Layer Options

 

 

IPX Options :

 

 

Rem LAN Net #= N/A

 

 

My WAN Net #= N/A

IP Options:

 

Hop Count= N/A

Rem IP Addr: 0.0.0.0

Tick Count= N/A

Rem Subnet Mask= 0.0.0.0

W/D Spoofing(min)= N/A

IP Address Assignment = Dynamic

SAP/RIP Timeout(min)=N/A

My WAN Addr= 0.0.0.0

Dial-On-Query= N/A

Single User Account= No

VPI #= N/A

Metric= 2

 

VCI #= N/A

Private= No

 

 

RIP Direction= Both

Bridge Options:

Version= RIP-1

Dial-On-Broadcast= N/A

Multicast= None

 

Ethernet Addr Timeout(min)= N/A

IP Policies=

 

VPI #= N/A

VPI #= 0

 

VCI #= N/A

VCI #= 35

Enter here to Confirm

Or ESC to Cancel:

Press Space Bar to Toggle.

Figure 5-6 Menu 11.3 for VC-based multiplexing with RFC 1483 and ENET ENCAP

Remote Node TCP/IP Configuration

5-5