Prestige P645 ADSL Internet Access Router

Menu 11.3 - Remote Node Network Layer Options

VPI/VCI (LLC-mux or PPP/PPPoE Encap): IPX Options :

VPI #=

0

Rem LAN Net #= 00000000

VCI #=

35

My WAN Net #= 00000000

IP Options:

 

Hop Count= 1

Rem IP

Addr: 0.0.0.0

Tick Count= 2

Rem Subnet Mask= 0.0.0.0

W/D Spoofing(min)= N/A

IP Address Assignment = Dynamic

SAP/RIP Timeout(min)=N/A

My WAN

Addr= 0.0.0.0

Dial-On-Query= N/A

Single

User Account= Yes

 

Metric= 2

 

Private= No

 

RIP Direction= None

Bridge Options:

Version= RIP-1

Dial-On-Broadcast= N/A

Multicast= None

Ethernet Addr Timeout(min)= 0

IP Policies=

 

Enter here to CONFIRM or ESC to CANCEL:

Figure 5-3 Menu 11.3 for LLC-based multiplexing

In this case, only one set of VPI and VCI numbers need be specified for all protocols. The valid range for the VPI is 1 to 255 and for the VCI is 32 to 65535 (1 to 32 is reserved for local management of ATM traffic).

The following diagram explains the Sample IP Addresses to help you understand the My Wan Addr field in menu 11.3. Refer to the section on Internet access for a brief review of what a WAN IP is. My WAN Addr indicates the local Prestige WAN IP while Rem IP Address indicates the peer WAN IP.

Remote Node TCP/IP Configuration

5-3