Prestige P645 ADSL Internet Access Router

Figure 5-4 Sample IP Addresses for a TCPI/IP LAN-to-LAN Connection

To configure the TCP/IP parameters of a remote node, first configure the fields in Menu 11.1 – Remote Node Profile, as shown in the next table. For more details on the IP Option fields, refer to the section on Internet access.

Menu 11.1 - Remote Node Profile

Rem Node Name= ChangeMe

Route= IP

Active= Yes

Bridge= No

Encapsulation= PPP

Edit PPP Options= No

Multiplexing= VC-based

Rem IP Addr= 0.0.0.0

Incoming:

Edit IP/IPX/Bridge= No

Rem Login=

 

Rem Password=********

Session Options:

Outgoing:

Edit Filter Sets= No

My Login= oscar

PPPoE Idle Timeout (sec)= N/A

My Password= ********

PPPoE Service Name= N/A

Authen= CHAP/PAP

Schedule Sets= N/A

Press ENTER to CONFIRM or ESC to CANCEL:

Figure 5-5 Menu 11.1 Remote Node Profile

5-4

Remote Node TCP/IP Configuration