Prestige 645 ADSL Internet Access Router
Step 2. Create a rule for this set in Menu 25.1.1 - IP Routing Policy as shown next.
| Menu 25.1.1 - IP Routing Policy | ||
Policy Set Name= set1 |
| ||
Active= Yes |
|
|
|
Criteria: |
|
|
|
IP Protocol | = | 6 |
|
Type of Service= | Don't Care | Packet length= 10 | |
Precedence | = | Don't Care | Len Comp= N/A |
Source: |
|
|
|
addr start= 192.168.1.33 | end= 192.168.1.64 | ||
port start= 0 |
| end= N/A | |
Destination: |
|
|
|
addr start= 0.0.0.0 | end= N/A | ||
port start= 80 |
| end= 80 | |
Action= Matched |
|
|
|
Gateway addr | = | 192.168.1.1 | Log= No |
Type of Service= | No Change |
| |
Precedence | = | No Change |
|
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.
FigureStep 3. Check Menu 25.1 - IP Routing Policy Setup to see if the rule is added correctly. Step 4. Create another policy set in menu 25.
Step 5. Create a rule in menu 25.1.1 for this set to route packets from any host (IP=0.0.0.0 means any host) with protocol TCP and port FTP access through another gateway (192.168.1.100).
IP Policy Routing |