Prestige P645 ADSL Internet Access Router

Step 2. Move the cursor to the Edit IP/IPX/Bridge field, then press the [SPACE BAR] to select Yes and press [ENTER] to open Menu 11.3 - Network Layer Options.

Menu 11.3 - Remote Node Network Layer Options

VPI/VCI (LLC-mux or PPP/PPPoE Encap): IPX Options :

VPI #=

0

Rem LAN Net #= 00000000

VCI #=

35

My WAN Net #= 00000000

IP Options:

 

Hop Count= 1

Rem IP

Addr: 0.0.0.0

Tick Count= 2

Rem Subnet Mask= 0.0.0.0

W/D Spoofing(min)= N/A

IP Address Assignment = Dynamic

SAP/RIP Timeout(min)=N/A

My WAN

Addr= 0.0.0.0

Dial-On-Query= N/A

Single

User Account= Yes

 

Metric= 2

 

Private= No

 

RIP Direction= None

Bridge Options:

Version= RIP-1

Dial-On-Broadcast= N/A

Multicast= None

Ethernet Addr Timeout(min)= 0

IP Policies=

 

Enter here to CONFIRM or ESC to CANCEL:

Figure 7-2 Menu 11.3 - Remote Node Bridging Options

The following table describes the bridging-specific parameters in Menu 11.1 - Remote Node Profile and Menu 11.3 - Remote Node Network Layer Options menus.

Table 7-2 P645R Remote Node Network Layers Menu Bridge Options

FIELD

DESCRIPTION

 

 

Bridge (menu 11.1)

Make sure this field is set to Yes.

 

 

Edit IP/IPX/Bridge

Press the [SPACE BAR] to change it to Yes and press [ENTER] to go to Menu

(menu 11.1)

11.3 –Remote Node Network Layer Options.

 

 

Dial-On-Broadcast

This field is necessary for your Prestige on the caller side LAN. When set to Yes,

(menu 11.3)

any broadcasts coming from the LAN will trigger your Presige to make a call to

 

this remote node. If it is set to No, your Prestige will not make the outgoing call.

 

 

Ethernet Addr

In this field, enter the time (number of minutes) that you wish your Prestige 645R

Timeout (min) (menu

to retain the Ethernet Addr information in its internal tables while the line is down.

11.3)

If this information is retained, your Prestige 645R will not have to recompile the

 

tables when the line is brought back up.

 

 

Bridging Setup

7-3