Prestige P645 ADSL Internet Access Router

6.3IPX Ethernet Setup

From Menu 3 - Ethernet Setup, enter 3 to go to Menu 3.3 - Novell IPX Ethernet Setup as shown in the figure below.

Menu 3.3 - Novell IPX Ethernet Setup

Seed Router= No

Frame Type 802.2= Yes

IPX Network #= N/A

Frame Type 802.3= No

IPX Network #= N/A

Frame Type Ethernet II= No

IPX Network #= N/A

Frame Type SNAP= No

IPX Network #= N/A

Enter here to CONFIRM or ESC to CANCEL:

Press Space Bar to Toggle.

Figure 6-3 Menu 3.3 - Novell IPX Ethernet Setup

The following table describes the Novell IPX Ethernet Setup Menu.

Table 6-1 Novell IPX Ethernet Setup Fields

FIELD

DESCRIPTION

EXAMPLE

Seed Router

Select Yes or No to determine if your Prestige 645R

No

 

is to act as a seed router.

 

Frame Type

Enable/Disable the individual frame type.

No

 

Remember to enable only the ones that are actually

 

 

used on your network. 802.2, 802.3, Ethernet II and

 

 

SNAP

 

IPX Network

If your Prestige 645R is a seed router, enter a

N/A

#

unique network number for each frame type enabled.

 

Press [ENTER] at the message [Press ENTER to Confirm ...] to save your configuration, or press [ESC] at any time to cancel.

6-4

IPX Configuration