Prestige P645 ADSL Internet Access Router

successful authentication, please make sure that you specify the correct authentication protocol when connecting to such an implementation.

4.1.4 Editing PPP Options

To edit the remote node PPP Options, move the cursor to the Edit PPP Options field in Menu 11.1 - Remote Node Profile, and use the [SPACE BAR] to select Yes. Press [ENTER] to open menu 11.2, as shown next.

Menu 11.2 - Remote Node PPP Options

Encapsulation= Standard PPP

Compression= No

Press ENTER to CONFIRM or ESC to CANCEL:

Press Space Bar to Toggle.

Figure 4-3 Menu 11.2 - Remote Node PPP Options

The following table describes the Remote Node PPP Options Menu, and contains instructions on how to configure the PPP options fields.

Table 4-2 Remote Node PPP Options Menu Fields

FIELD

DESCRIPTION

EXAMPLE

Encapsulation

Select CISCO PPP only when this remote node is a

Standard PPP

 

Cisco machine; otherwise, select the Standard PPP.

 

 

 

 

Compression

Turn on/off Stac Compression. The default for this

Off

 

field is Off.

(Default)

 

 

 

 

 

Once you have completed filling in Menu 11.2 – Remote Node PPP Options, press [ENTER] at the message [Press ENTER to Confirm…] to save your configuration, or press [ESC] at any time to cancel.

4.1.5 Remote Node Filter

Use Menu 11.5 – Remote Node Filter to specify the filter set(s) to apply to the incoming and outgoing traffic between this remote node and the Prestige. You can specify up to four filter sets separated by commas, e.g., 1, 5, 9, 12, in each filter field. The Prestige comes with default filter number 6 applied. This filter blocks FTP, Telnet, TFTP and HTTP from coming in from the WAN.

Remote Node Configuration

4-5