Prestige P645 ADSL Internet Access Router

The following table contains the instructions on how to configure the Edit IP Static Route Menu.

 

Table 6-3 Edit IPX Static Route Menu Fields

 

 

FIELD

DESCRIPTION

Route #

The number of this static route that you chose in menu 12.2.

 

 

Server Name

In this field, enter the name of the server. This must be the exact name configured in

 

the NetWare server.

Active

Use the [SPACE BAR] to select Yes to activate or No to deactivate this IPX static

 

route.

 

 

Network #

This field contains the internal network number of the remote server that you wish to

 

access. [00000000] or [FFFFFFFF] are reserved.

 

 

Node #

This field contains the address of the node on which the server resides. If you are

 

using a Novell IPX implementation, this value is [000000000001].

Socket #

This field contains the socket number on which the server will receive service

 

requests. The default for this field is hex [0451].

Type #

This field identifies the type of service the server provides. The default for this field is

 

hex [0004].

 

 

Gateway

In this field, enter the number of the remote node that is the gateway for this static

Node

route.

 

 

Hop Count

These two fields have the same meaning as those in the Ethernet setup.

and Tick

 

Count

 

Once you have completed filling in the menu, press [ENTER] at the message [Press ENTER to Confirm…] to save your configuration, or press [ESC] to cancel.

6-8

IPX Configuration