ZyXEL Communications EOC350 1.4 The RESET Button, 1.3.2 Connections

Chapter 1 Introduction

1.3.2 Connections

Figure 4 EOC350-TA Connections

Link/Act

QLTY

		PWR
	DC	IN
12V

1

2

OUT

IN

OUT	Power In
IN	Ethernet Ports

The following table describes the connections.

Table 4 EOC350-TA Connections

ITEM	DESCRIPTION
IN	Connect this port to an existing coaxial cable outlet in the room that is in the same coaxial
	network as the EOC350-TS in the building.
OUT	Connect this port to an analog television directly if the EOC350-TS IN port is connected to
	a satellite TV, cable TV or VHF/UHF antenna.
Ethernet Ports	These are Fast Ethernet ports that can be used to connect to a set top box (STB) that then
	connects to an analog television (or directly to a smart TVwith an Ethernet port). The LED
	is steady green when there is an Ethernet connection and blinks when there is traffic.
12V DC-IN	Connect the included power adapter to a power outlet.

1.4 The RESET Button

If you forget your password or cannot access the web configurator, you will need to use the RESET button at the back of the device to reload thefactory-default configuration file. This means that you will lose all configurations that you had previously and the passwords will be reset to the defaults.

To set the device back to the factory default settings, press the RESET button for 5 seconds.

	13
EOC350 Series User’s Guide