3

System Setup

3.1 Overview

This chapter describes how to configure the IP and DHCP Snooping parameters of the Ethernet interface facing the Internet Service Provider (ISP).

3.2 The System Setup Screen

Use this screen to configure the IP and DHCP Snooping parameters. Click System Setup to show the following screen.

Figure 8 System Setup

The following table describes the items in this screen.

Table 7 System Setup

LABEL

DESCRIPTION

IP Address

Select Static to enable manual IP configuration or Dynamic (DHCP) to enable the EOC350-

Assignment

TS to get its IP configuration via the Dynamic Host Configuration Protocol (DHCP).

 

 

IP Address

Enter the IP address you want to assign to your EOC350-TS in dotted decimal notation, for

 

example, 192.168.1.1 (factory default).

 

 

Subnet Mask

Type the subnet mask of your network in dotted decimal notation, for example

 

255.255.255.0 (factory default). Your EOC350-TS automatically computes the subnet mask

 

based on the IP address you enter, so do not change this field unless you are instructed to do

 

so.

 

 

Default

Enter the IP address of the default gateway in dotted decimal notation, for example

Gateway

192.168.1.254.

 

 

 

19

EOC350 Series User’s Guide