Chapter 2 The Web Configurator

The following table describes each menu item.

Table 6 Navigation Panel Summary

MENU/SUB-MENU

FUNCTION

System Info

Use this menu to see the MAC addresses and hardware and software

 

versions of the device.

 

 

System Setup

Use this menu to configure the IP and DHCP Snooping parameters of the

 

Ethernet interface facing the Internet Service Provider (ISP).

 

 

Auto Configuration

Use this menu to setup automatic retrieval and distribution of (*.shc and

 

*.ep) configuration files from a TFTP server.

 

 

EP Management

Use this menu to view and configure the termination system and

 

termination adapters, (EPs) and test connectivity between them. An EP is

 

an EOC350-TA.

 

 

Administration

Use this menu to configure access to the management interface.

 

 

Administrator

Use this sub-menu to configure user names and passwords allowed to log

 

in to the management interface.

 

 

Allowed Source

Use this sub-menu to configure which computers are allowed access to

 

the management interface.

 

 

Telnet Setup

Use this sub-menu to enable and configure the telnet server.

 

 

HTTP Setup

Use this sub-menu to enable and configure the HTTP server.

 

 

SNMP Setup

Use this sub-menu to enable and configure the SNMP agent.

 

 

SNMP Trap Server

Use this sub-menu to configure where SNMP agent sends SNMP traps.

 

 

System Log

Use this menu to configure syslog and view system messages.

 

 

Syslog Setup

Use this sub-menu to configure when and where syslog messages are

 

sent.

 

 

View Log

Use this sub-menu to see all messages generated by the system.

 

 

System Time

Use this menu to configure and see the system time.

 

 

SNTP Setup

Use this sub-menu to configure when and where the time is updated from.

 

 

View Time

Use this sub-menu to see the current system time.

 

 

Static MAC

Use this menu to configure which MAC addresses are forwarded through

 

the Ethernet interfaces.

 

 

Reboot System

Use this menu to restart the system.

 

 

Default Setting

Use this menu to reset the system to factory defaults.

 

 

Upload Firmware

Use this menu to put new firmware in the upload area.

 

 

Activate Firmware

Use this menu to copy new firmware from the upload area to the working

 

area and restart with it.

 

 

System Firmware

Use this sub-menu to copy new firmware from the upload area to the

 

working area and restart with it.

 

 

Backup/Restore

Use this menu to download and upload configuration files.

 

 

Backup Master

Use this sub-menu to download a configuration file.

 

 

Restore Master

Use this sub-menu to upload a configuration file.

 

 

2.3.2 Main Window

The main window displays information and configuration fields. It is discussed in the rest of this document. After login, the main window shows the System Info screen.

18

 

EOC350 Series User’s Guide