Chapter 5 EP Management

5.5 Termination System Configuration

This section describes the configuration screens for the termination system (Local Device).

5.5.1 The EoC Screen (Privacy Mode)

Use this screen to restrict which termination adapters can send and receive data through the termination system. Click EP Management > Ether > Config > EoC on the local termination system device to show the following screen.

Figure 13 EP Management > Ether > Config > EoC (termination system)

The following table describes the items in this screen.

Table 12 EP Management > Ether > Config > EoC (termination system)

LABEL

DESCRIPTION

Note

Type a note here.

 

 

Privacy Mode

Select On to require termination adapters to have the same privacy key as the termination

 

system to send packets through it. Select Off to allow termination adapters to send packets

 

through the termination system without using a privacy key.

 

 

Privacy Key

Type a 16-bit key here. The factory default key is 0, which disables privacy mode.

 

 

Apply

Click Apply to save your settings.

 

 

Back

Click Back to return to the previous screen.

 

 

5.5.2 The Port Screen

Use this screen to throttle the bandwidth of the termination system’s interfaces. Click EP Management > Ether > Config > Port on the local termination system device to show the following screen.

 

25

EOC350 Series User’s Guide