|
|
|
| Chapter 11 Telnet |
|
|
|
|
|
| Table 50 Generic Telnet Commands (continued) |
|
| |
| COMMANDS | ARGUMENTS | DESCRIPTION | |
| [ ] IS OPTIONAL | |||
|
|
|
| |
| swqosq | Display or setup the QoS Queue Scheduling, and | ||
|
| 802.1p or IP Priority scheme selection. | ||
|
| • | ||
|
|
| ||
|
|
| • | strict: strict priority |
|
|
| • | wfq: weighted fair queue Q3/Q2/Q1/Q0 |
|
|
|
| service weight 8/4/2/1 |
|
|
| • | mix: Q3 is strict, Q2/Q1/Q0 service |
|
|
|
| weight=4/2/1 |
|
|
| • | |
|
|
| • | 0: base on 802.1p (default) |
|
|
| • | 1: base on IP TOS/TC or DSCP |
|
|
|
| |
| swqosrate |
| Display or setup bandwidth throttling on LAN1/ | |
|
|
| LAN2. | |
|
|
| • <lan1/lan2>: configure LAN1 or LAN2 port | |
|
|
| • <tx/rx>: direction, incoming (rx) or outgoing | |
|
|
| (tx) | |
|
|
| • <on/off>: enable or disable control on this | |
|
|
| direction | |
|
|
| • <N>: the maximum rate (multiply value by | |
|
|
| 64kbps). Range from 1 to 3125, bandwidth | |
|
|
| control is invalid if N >= 3125 (>200Mbps) | |
|
|
|
| |
| swqostc |
| Display or setup the QoS configuration for TCP/ | |
|
|
| UDP traffic classification, to assign a higher priority | |
|
|
| for up to 8 different TCP/UDP protocols. | |
|
|
| • <set>: rule set index (0~2) | |
|
|
| • <act/deact>: activate or deactivate this set | |
|
|
| • <port>: TCP/UDP port number (0~65535), | |
|
|
| • <queue>: select queue index (0~3) for this | |
|
|
| rule set to q0 (lowest priority) / q1 / q2 / q3 | |
|
|
| (highest priority) | |
|
|
|
| |
| swsmac | Display or setup the static MAC entry. A total of 8 | ||
|
| entries can be setup. | ||
|
| • <mac>: axm 8ntries | ||
|
|
| ||
|
|
| • <lan1/lan2>: bind the current MAC entry to | |
|
|
| LAN1 or LAN2 port, i.e. enable this MAC entry | |
|
|
| as static MAC | |
|
|
| • <off>:disable this MAC entry, neither bind to | |
|
|
| LAN1 nor LAN2 | |
|
|
| • <del>: remove the current MAC entry. | |
|
|
| Invalidate this MAC entry to the default | |
|
|
| ||
|
|
|
|
|
| 67 |
EOC350 Series User’s Guide | |
|
|