Chapter 5 EP Management

Figure 15 Management > Ether > Config > QoS (termination system)

The following table describes the items in this screen.

Table 14 Management > Ether > Config > QoS (termination system)

LABEL

DESCRIPTION

Priority base

Select 802.1p to configure the IEEE 802.1p prioritization scheme for incoming frames.

on

Select IP TOS/TC or DSCP to configure the IP prioritization scheme.

 

 

Queue

Select Strict Priority to forward packets in the higher priority queues first (Q0 has the

Scheduling

lowest priority). Packets in the lower priority queues will be forwarded after the higher

 

priority queues are empty.

 

Select Weight fair Queue to forward 8 packets from Q3, then 4 packets from Q2, then 2

 

packets from Q1, and then 1 packet from Q0.

 

Select Mix mode to use strict priority to forward packets from Q3 first, and weighted fair

 

queuing to forward packets from Q2, Q1, and Q0.

 

 

Port

Type a TCP/UDP port number to prioritize traffic for important applications.

 

 

Queue

Select a queue for this port.

 

 

Apply

Click Apply to save your settings.

 

 

Back

Click Back to return to the previous screen.

 

 

5.5.4 The IGMP Screen

Use this screen to enable IGMP v1/2 fast leave on the termination system’s interfaces. Click EP Management > Ether > Config > IGMP on the local termination system device to show the following screen.

Figure 16 EP Management > Ether > Config > IGMP (termination system)

 

27

EOC350 Series User’s Guide