Chapter 11 Telnet

Table 50 Generic Telnet Commands (continued)

COMMANDS

ARGUMENTS

DESCRIPTION

[ ] IS OPTIONAL

 

 

 

swtagvlan

[-c <on/off>]

Display or setup the LAN1/LAN2/EoC tagged

 

[-p <lan1/lan2/hpna> [-r <priority

VLAN.

 

 

 

 

(0~7)>] [-v <vid (1~4095)>] [-i

• <lan1/lan2/hpna>: configure LAN1, LAN2 or

 

<all/tag>] [-o <untag/tag/ bypass

 

EoC port

 

>]]

• <priority>: 802.1p value, 0~7

 

 

• <vid>: 802.1Q VID, 1~4095

 

 

• <all/tag>: This is an ingress rule to accept all

 

 

 

incoming packets or accept incoming tagged

 

 

 

packets only, reject other incoming packets.

 

 

• <untag/tag/bypass>: This is an egress rule to

 

 

 

untag, tag or bypass the outgoing packets.

 

 

• -c: enable tagged VLAN mode or not

 

 

• -p: the port in tagged VLAN mode

 

 

• -r: 802.1p in tagged VLAN mode

 

 

• -v: VID of 802.1Q in tagged VLAN mode

 

 

• -i: ingress rule for the port in tagged VLAN

 

 

 

mode

 

 

• -o: egress rule for the port in tagged VLAN

 

 

 

mod

 

 

 

tftp

-s <ip or host>

Get a file (upload file onto termination system) or

 

-c <get/put>

to put a file (retrieve file from termination system)

 

from a TFTP server.

 

 

 

-f <file>

• <ip or host>: IP address or host name

 

 

 

 

• <get/put>: run TFTP command 'get' or 'put'

 

 

•

<file>: filename

 

 

 

time

 

Display current system time.

 

 

 

upep

[-a]

Upgrade the termination adapter EoC. For EoC

 

[-m <mac>]

drivers, this operation also synchronizes the

 

termination adapter with the termination adapter

 

 

 

[-n <note>]

EoC Properties stored in the termination system.

 

 

 

 

[-v]

• -a: upgrade all on-line termination adapters at

 

 

once

 

 

 

 

 

• -m: upgrade the termination adapter with

 

 

 

matching MAC <mac>

 

 

• -n: upgrade the termination adapter 'Note'

 

 

 

property <note> of the termination adapter

 

 

 

with the matching MAC <mac>

 

 

 

upmaster

 

Upgrade the termination system EoC driver

 

 

(stored in Upload Area). This operation also

 

 

synchronizes the termination system EoC device

 

 

with its termination system EoC Properties.

 

 

 

upsys

 

Upgrade the uploaded system firmware (stored in

 

 

Upload Area), then reboot.

 

 

 

useradd

name

Create new management user account.

 

-p <password>

•

name: user name

 

-r <ro/rw>

• -p: login password

 

• -r: 'ro' means a user has read-only privileges,

 

 

 

 

 

'rw' means a user has read-write privileges

 

 

 

userdel

name

Delete the management user account.

 

 

•

name: user name

 

 

 

 

68

 

EOC350 Series User’s Guide