![](/images/backgrounds/127161/127161-16844x1.png)
|
| Dimension |
|
|
| Table |
|
|
|
|
|
| FIELD | DESCRIPTION |
|
|
|
|
|
| Max Delay | Specify a time period a low priority packet is allowed to queue in the |
|
| Time | switch before the packet is dropped. |
|
| Priority Queue | With QoS (Quality of Service) organizations can differentiate traffic by |
|
| Assignment | setting the precedence values in the IP header at the periphery of the |
|
| (Checked for | network to enable the backbone to prioritize traffic. |
|
| High Priority) |
|
|
|
|
|
|
| Level1 … | Select the check box(es) to add the packets with the level bits to the high |
|
| Level7 | priority queue. |
|
| Protocol Enable Settings |
| |
|
|
|
|
| Enable | Select this option to activate Spanning Tree Protocol (STP). Refer to the |
|
| Spanning | STP chapter for more information. |
|
| Tree Protocol |
|
|
|
|
|
|
| Enable IGMP | Select this option to activate Internet Group Multicast Protocol (IGMP). |
|
| Protocol | Refer to Section 8.1 for more information. |
|
| IGMP Query | Select Auto to allow the network to automatically find the IGMP server. |
|
| Mode | The multicast device with the lowest numerical IP address to be the IGMP |
|
|
| server. This is the default setting. |
|
|
| Select Enable to force this switch to be the IGMP server even when there |
|
|
| is already an IGMP server on the network. Selecting this option may |
|
|
| affect network performance. |
|
|
| Select Disable to forcibly disallow this switch from being an IGMP server. |
|
|
|
|
|
| VLAN | Select No VLAN, 802.1Q with GVRP, 802.1Q without GVRP or Port- |
|
| Operation | Based from the |
|
| Mode | Select No VLAN to disable VLANs. |
|
|
| Select 802.1Q with GVRP to set up |
|
|
| beyond the local switch. |
|
|
| Select 802.1Q without GVRP to set up |
|
|
| switch only. |
|
|
| Select |
|
|
| Refer to the chapter on VLANs. |
|
|
|
|
|
Advanced Switch Configuration |